** FREE DELIVERY & FREE WARRANTY **

3 Steps in Installing An Electric Wall Fireplace

RSS
3 Steps in Installing An Electric Wall Fireplace

It’s easy to find a wide range of electric fires if you search in the market. There are electric stove heaters that you can simply put in an existing fireplace. There are wall-mounted fireplaces that you need to install in the wall.

Most of you might say that the stove heater is a better choice. They offer the same features, but a wall-mounted fireplace looks more sophisticated.

Should you pick an electric wall fireplace? Here’s why.

Simple Reasons to Use an Electric Wall Fireplace

Celsi Ultiflame Elite

  1. Save More Space

Although electric fireplaces don’t take too much space, not everyone has a big room. If your room is already crowded, getting an electric fireplace will help you save space.

Since you can put the fireplace on the wall, you will save more space on the floor. As long as there is an electrical outlet near the wall where you will install it, you won’t have any issues. If this is not possible, speak to a local electrician who can probably work around this issue for you. 

  1. Stylish

A wall-mounted electric fireplace is more elegant and sophisticated than a regular fireplace. Other models are stylish as well, but a wall-mounted model will bring your interior to the next level.

It would fit almost any type of interior. If you have a traditional or a modern design, a wall-mounted model would fit perfectly.

  1. Safe for Kids and Pets

Since you are going to install the fireplace in the wall, your pets and kids won’t reach it. The electric fireplace doesn’t heat up, but it is still considered an electrical appliance. It is better if the fireplace will be out of reach for pets and kids to avoid accidents.

  1. Lasts for a Long Time

One of the reasons why this type of fireplace lasts for a long time is its design. Since it is a wall-mounted model, it won’t get hit by your kids or pets, unlike a portable electric heater.

The fireplace is in a higher location so it won’t get easily damaged. Electric heaters are also made from high quality materials, especially if it is from a reputable brand (Celsi, for example).

  1. Easy Installation

Electric fireplaces are very easy to install. Installing a standard electric fireplace doesn’t require you to be a pro. Electric wall fires come with a bracket and it is the only thing that you need to install in the wall.

As long as you have basic tools, it’s possible to install your fireplace in just a few steps.

Tips in Selecting a Wall-Mounted Fireplace

If you decided to buy a wall-mounted fireplace, you should know what to look for. Although the features are almost the same as electric log fires, there are a few differences that you should keep in mind.

  1. Size

Wall-mounted fireplaces are usually bigger. They have a wide length so you need to be very careful when buying. You don’t want to end up buying a big fireplace without having enough space in your house.

The best thing to do is to check the place where you want to install the electric fire and see if the model that you want would fit in it. Take the measurements first and find a model that would fit that space.

  1. Design

You need to look for an electric fireplace that would complement the interior design of your house. Match the color with the prominent features of the room.

Most units are rectangular, but some are flat screen, curved, and some of them have beveled edges. Find a design that would fit perfectly on the design of your interior.

  1. Heat Release

This is the feature that most homeowners disregard. You need to check if the fireplace releases the heat at the top, bottom, front, or all sides.

This would help you know what items to place at the bottom or the side of the fireplace. It is also important for the installation since it would help you adjust the height of the installation.

This is an important feature for your safety because putting flammable items near the area where the heat is released will be dangerous. It causes fire and other accidents.

  1. Heat Output

This type of fireplace is very big, but it doesn’t mean that it will warm your room efficiently. Electric fireplaces come with different heat outputs so you need to know how much energy they use.

The more energy your fireplace uses, the more heat it will produce. A 2-kW unit can heat a 40-square meter room. If your room is bigger, you should get a fireplace with more heat output.

Installing an Electric Wall-Mounted Fireplace

The Installation of a fireplace is very straightforward. But, there are important things that you need to check to make sure that you can set it up properly.

First, start preparing the tools for the installation process.

Preparing for the Wall Fireplace Installation

  1. Can you Handle the Installation?

By looking at your skills, can you really cope with the installation? Do you have the courage to try and install an electric fireplace? If you know how to use tools to install the brackets, then it’s possible to do this yourself.

Installing a fireplace is not too difficult. But, you might encounter problems that are hard to handle. If you are unsure whether you can handle it or not, your friends or relatives will assist you. A professional is needed if you need help installing the fireplace.

  1. Prepare the Tools

You need to have specific tools to install the fireplace properly.

  • Electric drill
  • Phillips head screwdriver
  • Stud finder
  • Yardstick or tape measure
  • Carpenter’s Level
  1. Search for a Safe Location Near a Power Outlet

You need to look for a safe place in the wall that is very close to a power outlet. You should never use an extension cord no matter what happens as it increases the risk of fire.

Electric fireplaces have three types based on where the heat is coming from. The heat is usually released at the bottom part of the unit. You’ll find fireplaces where the heat comes from the front or top. You need to pay attention to this as it would help you find the safest place to install your fireplace.

You should know of the clearances from objects that burn easily around the fireplace. You should check the product manual to help you figure out how to properly install the fireplace.

If the heat comes from the top of the fireplace, the outlet should be at the bottom. This is to prevent fire or electrical problems. If the heat comes from the bottom, you need to look for an outlet beside or at the top of the heater. For this kind of fireplace, you need to make sure that it is about 1.5 feet high from the floor.

If the heat is released on the front, you just need to make sure that the fireplace is in an open space. You have to guarantee that the flammable things in your room are not obstructing the heat.

  1. Find the Studs on your Chosen Location

Finding the studs in the location that you prefer for the installation is not too difficult. If you have a stud finder, it is very easy to locate the studs where the brackets would be placed.

Plan everything and make sure that the measurements are correct. This would help prevent any problems when you are installing the bracket.

Wall Fireplace Installation Process

The installation process is very simple and straightforward. Since you already prepared the tools that you need and the place where the fireplace will be installed, the installation would be very easy.

Step #1: Attach the Bracket to the Wall

You already located the studs, so you need to clear off the wood from the wall. You should use the Carpenter’s level to check the mounting bracket. The bracket should be level because the tilt would be more pronounced once you install the fireplace.

Secure the mounting brackets on the stud to hold the weight of the fireplace.If you noticed that the studs do not match with the holes on the bracket, you have to screw one end to a stud. The other end will be secured by using an anchor bolt. The anchor bolt that you need to use should be rated to carry your fireplace.

Step #2: Hang the Firebox into the Mounting Bracket

Once the brackets are fully installed, the next step is to hang the firebox. You can check if the model of fireplace you are using comes with a bottom bracket. Once you attached the firebox, install the bottom bracket to secure it.

Step #3: Place the Screen into the Firebox

When the firebox is already secured in place, the final step is to put the screen into the firebox. Plug the electric fire into the outlet and let it warm your room.

Installing a Recessed Electric Fireplace

Another type of heater that you can install on your wall is a recessed electric fireplace. This type of unit is also installed on the wall. But, instead of using brackets, you need to attach it to the wall.

This type of installation is complicated and a professional installer might be required. You should consider hiring an electrical expert to handle the electrical wirings.

Here is a simple guide on how to efficiently install a recessed fireplace.

Step #1: Selecting a Wall

Unlike a wall-mounted unit, a recessed fireplace requires you to cut an opening on the wall. It should be larger than the unit. This would make sure that it will fit perfectly.

Searching for a non-load bearing wall is important. A load-bearing wall supports the weight of the roof or floor. If you cut on a load-bearing wall, there is a chance that the structure would collapse easily.

If you don’t know how to tell whether a wall is load-bearing or not, let a professional check it. This would make sure that you won’t make any mistakes when installing the fireplace. You should also look for an outlet near the wall that you’ve chosen.

Step #2: Cutting the Wall

Once you’ve selected a wall and made sure that it is not load-bearing, the next step is to mark the wall before cutting it. The general rule is for the frame to be 1/4" larger than the dimension of the firebox. This will guarantee that there is sufficient space for your electric fireplace.

Step #3: Remove the Studs

If you are installing the fireplace into a drywall, you need to remove the studs. It is the main reason why you should not attach a fireplace to a load-bearing wall. You need to take out the studs so a load-bearing wall will surely collapse if you do this.

You need to remove the studs. You cannot insert the fireplace fully into the wall without cutting them out. It is better to use a handsaw to remove the studs to make sure that you won’t damage the drywall.

Step #4: Add Stud Fillers

Since you’ve cut the studs from the drywall, you need to add fillers to the spaces. This will re-support the wall and provide anchors where you can screw the fireplace in place.

Step #5: Attach the Built-in Fireplace

After installing the stud fillers, it is time to insert your fireplace. You need a couple of people to hold the fireplace in place and someone has to drill the screws to fix it into the wall. You need to attach the firebox before putting the front glass panel.

Conclusion

An electric fireplace is a more favorable option in heating your home. It provides comfort during the winter season while making your interior more elegant and attractive. The heat makes you comfortable, while the fire display would complement the design of the room.

It would take time to install them on your wall, but with the right tools and basic knowledge of the installation, it will be very easy. If you want to find the best fireplaces for your house, you can check out some of the best fireplaces here.

Previous Post Next Post

Comments 0
Leave a comment
Your Name:*
Email Address:*
Message: *

Please note: comments must be approved before they are published.

* Required Fields